What should we pay attention to when purchasing aluminum gusset plate production equipment and aluminum gusset plate mol

What problems will PVC plates formed by gusset mold encounter?

What problems will PVC plates formed by gusset mold encounter?1.Large longitudinal thickness deviation of PVC plate①The temperature control of the barrel is unstable,which makes the melt flow unstabl...

In what fields are gusset dies used?

In what fields are gusset dies used?The principle of aluminum alloy is very simple and easy to distinguish.The surface aluminum sheet is formed,the middle polyurethane foam layer is insulated,and the ...

Plug mold caused by temperature of profile mold

Plug mold caused by temperature of profile moldMainly due to the high proportion of mold plugging caused by impurities mixed into the aluminum rod during the melting and casting process,and these fore...

What are the conditions of mold plugging caused by unreasonable design of profile mold?

A mold plugging caused by unreasonable design of profile moldMold blocking caused by deviation of mold flow rate:it is common in profiled materials or cantilever long and wide flat materials(1)The pro...

What are the key points of profile mold design?

What are the key points of profile mold design?The key points of profile mold design are as follows:(1)The mold cavity should be streamlined as much as possible,and the cylindrical section of the extr...

What are the requirements of gusset mold design and production?

What are the requirements of gusset plate mold design and productionThe requirements of gusset mold design and manufacture are:accurate size and smooth surface;Reasonable structure,high production eff...

Understand gusset mold

Understand gusset moldPVC gusset mold ceiling material is based on PVC resin,added with a certain amount of anti-aging agents,modifiers and other additives,and made through mixing,calendering,vacuum,p...

What are the key points of PVC gusset mold installation?

What are the key points of PVC gusset mold installation?The pipe mold structure used in the production of UPVC solid wall pipe by twin-screw extruder is roughly the same,which is generally composed of...